306

FORD 306 Looking for increased power without changing the original combination of your mustang? The 306ci Street Fighter is a cost effective high performance alternative. It is suitable for either normally aspirated or lightly boosted applications and will provide years of reliable performance. Need a Long Block or a Crate Motor...call your CHP Horsepower Expert today....he'll fit you with the combination you want! 306ci Street Fighter GT 4.000 to 4.060 bore - 3.480 stroke - Flat top piston • Cast steel crankshaft • Probe Machined Beam connecting rods • Probe FPS flat top forged pistons 306ci Street Fighter 4.000 to 4.060 bore - 3.000 stroke - Flat top piston • Cast steel crankshaft • Probe CNC Beam forged steel connecting rods • Probe SRS flat top forged pistons 306ci Street Fighter Pro Street 4.000 to 4.060 bore - 3.000 stroke - Flat top piston • Forged steel crankshaft • Probe forged steel connecting rods • Probe SRS flat top forged pistons
	306 Street Fighter GT
	Kit	11101-GT
	Short Block	11773-GT
	306 Street Fighter
	Kit	11101-SF
	Short Block	11773-SF
	306 Street Fighter Pro Street
	Kit	11101-PS
	Short Block	11773-PS
	Kits include: crankshaft, connecting rods, pistons, wrist pins, rings, and rod and main bearings. Shortblocks include: all of the above installed in an appropriate engine block. The assembly is balanced and blueprinted.
	Need a turn-key combination for your project car? CHP has the answer. Call your CHP customer service representative for friendly assistance with completing your CHP crate motor. CHP can supply everything you need for your application with a wide variety of oil pans, intake manifolds, balancers and flywheels etc. to make it work for you. We can even run your engine in to insure a trouble-free installation. All you’ll have to do is install your crate motor.
	347e Street Fighter (Short Block) 4.000 to 4.040 bore - 3.400 stroke - Dish piston Still the only C.A.R.B. legal Stroker! • Cast steel crankshaft • Probe CNC Beam steel connecting rods (5.315) • Probe SRS forged pistons • Probe Industries hydraulic roller camshaft • Timing Set 347e 50 STATE LEGAL! The 347e installed in a late model Mustang with factory heads will deliver about 330HP. Add a set of aftermarket, 50 state legal, cylinder heads and run about 380HP. This combination provides a smooth idle and broad torque curve, which makes it perfect for a late model Mustang slated for daily use.