CHP-We Build Horsepower!

Ford 331ci With the ultimate rod ratio in a 302 stroker the 1.696:1 331 stroker features the same offset wrist pin design as the venerable 347 Street Fighter. It is also benefited by the 1650 gram (approximately) bob weight, making this stroker one of the best street and strip engines of all time. Need a Long Block or a Crate Motor?...call your CHP Horsepower Expert today....he'll fit you with the combination you want! 331ci Street Fighter 4.000 to 4.040 bore - 3.250 stroke - Flat top piston Cast steel crankshaft Probe Machined Beam forged steel connecting rods Probe SRS forged pistons Dished and Blower Dish pistons available Shortblocks use a seasoned factory roller block. 331ci Street Fighter Pro Street 4.000 to 4.040 bore - 3.250 stroke - Flat top piston Forged steel crankshaft Probe 4340 H-Beam forged steel connecting rods Probe SRS forged pistons Dished and Blower Dish pistons available Shortblocks use a seasoned factory roller block. 331ci Dominator 4.000 to 4.040 bore - 3.250 stroke - Flat top piston Dart Sportsman block. Forged Steel Crankshaft (internal balance) Probe 4340 Lightweight I Beam forged steel connecting rods Probe Tool Steel Wrist Pins Probe SRS Forged Pistons Clevite "H" Series Engine Bearings Dished and Blower Dish pistons available .
	331 Street Fighter
	Kit	11413-SF
	Short Block	13916-SF
	331 Street Fighter-Pro Street
	Kit	11413-PS
	Short Block	13916-PS
	331 Dominator
	Kit	11413-DM
	Short Block	13916-DM
	Kits include: crankshaft, connecting rods, pistons, wrist pins, rings, and rod and main bearings. Shortblocks include: all of the above installed in an appropriate engine block. The assembly is balanced and blueprinted.
	Need a turn-key combination for your project car? CHP has the answer. Call your CHP customer service representative for friendly assistance with completing your CHP crate motor. CHP can supply everything you need for your application with a wide variety of oil pans, intake manifolds, balancers and flywheels etc. to make it work for you. We can even run your engine in to insure a trouble-free installation. All you’ll have to do is install your crate motor.
	347e Street Fighter (Short Block) 4.000 to 4.040 bore - 3.400 stroke - Dish piston Still the only C.A.R.B. legal Stroker! • Cast steel crankshaft • Probe CNC Beam steel connecting rods (5.315) • Probe SRS forged pistons • Probe Industries hydraulic roller camshaft • Timing Set 347e 50 STATE LEGAL! The 347e installed in a late model Mustang with factory heads will deliver about 330HP. Add a set of aftermarket, 50 state legal, cylinder heads and run about 380HP. This combination provides a smooth idle and broad torque curve, which makes it perfect for a late model Mustang slated for daily use.