Skip to product information
1 of 19

Coast High Performance

CHP 347 Dyno-Proven Street EFI Stroker Kit

CHP 347 Dyno-Proven Street EFI Stroker Kit

Regular price $8,190.88
Regular price Sale price $8,190.88
Sale Sold out
Shipping calculated at checkout.
Package
Quantity

Questions? Call 310-784-1010

Mon–Fri 8 AM–5 PM PT · Saturday 9 AM–1 PM PT (phones only)

A 347 cubic-inch small-block Ford street EFI stroker kit, built around a combination we ran on our engine dyno at about 10.5:1 compression. That pull made 465.5 horsepower at 5,600 rpm and 460.2 lb-ft at 4,900 rpm.

Kit parts are close to, but not identical to, the engine we dyno tested (cam, gasket and compression differ). Results vary with the build, tune and fuel.

The stroker kit includes a Scat forged crankshaft, Eagle forged I-beam rods, Race Tec forged pistons, a Total Seal ring set, King bearings, AFR 185 cylinder heads, a COMP Cams hydraulic roller camshaft and lifters, a Holley SysteMAX intake, a BBK 75 mm throttle body and 75 mm EGR spacer, AFR head-bolt reducer bushings, ARP head, main, and rod bolts, and Fel-Pro gaskets. The SysteMAX intake mouth must be opened to 75 mm.

Requirements / Not included. This kit requires a factory roller 1985–95 302 5.0 block with the stock dog bones and spider. The crank is internally balanced, so it needs a neutral damper and a neutral flywheel or flexplate, plus balancing. Balancing is available as a $478 add-on. Not included: the block, rockers (1.6 ratio, 3/8 in. stud), pushrods (length must be measured), timing set, damper, and flywheel or flexplate. The shop checks piston-to-valve clearance, installed spring height, and deck height.

An optional Holley Terminator X Fox-body 5.0 EFI add-on with a matching 42 lb/hr high-impedance EV1 injector set is sold separately. Racing use only. The Ford TPS and IAC connectors must be wired in (not included).

Enter the HEADHUNTER giveaway at CPRParts.com

Questions? Call a Coast High tech

Call 310-784-1010. Mon–Fri 8 AM–5 PM PT (shop and phones); Saturday 9 AM–1 PM PT (phones only). Storefront visits by appointment only.

View full details

347 ci · about 10.5:1 compression · Coast High Performance engine dyno

Measured on our engine dyno

465.5 hp at 5,600 rpm · 460.2 lb-ft at 4,900 rpm

These are our recorded results for this 347 ci, about 10.5:1 engine — the horsepower and torque from that pull, not a promise for another build.

Coast High Performance engine dyno — 347 ci, 10.5:1 Recorded horsepower and torque from 3,000 to 6,000 rpm. Peak 465.5 horsepower at 5,600 rpm and 460.2 pound-feet at 4,900 rpm. 460.2 lb-ft @ 4,900 465.5 hp @ 5,600

Kit parts are close to, but not identical to, the engine we dyno tested (cam, gasket and compression differ). Results vary with the build, tune and fuel.

What's included

  • Scat forged 347 crankshaft (4.030 in. bore × 3.400 in. stroke, 302 mains, internally balanced)
  • Eagle 5.400 in. forged I-beam connecting rods
  • Race Tec forged pistons and Total Seal ring set
  • King main and rod bearings
  • AFR 185 cylinder heads
  • COMP Cams hydraulic roller camshaft and hydraulic roller lifters
  • Holley SysteMAX intake manifold
  • BBK 75 mm throttle body and 75 mm EGR spacer
  • AFR head-bolt reducer bushings
  • ARP head, main, and rod bolts
  • Fel-Pro head and intake gaskets

Kit specs

  • 347 cubic-inch small-block Ford (302-based stroker)
  • About 10.5:1 compression
  • Hydraulic roller cam, 216°/224° at 0.050 in., 0.544/0.555 in. lift, 112° LSA
  • Firing order 1-3-7-2-6-5-4-8
  • AFR 185 heads and street EFI intake
  • BBK 75 mm throttle body; the SysteMAX intake mouth must be opened to 75 mm
  • Naturally aspirated

Requirements / Not included

  • Requires a factory roller 1985–95 302 5.0 block with the stock dog bones and spider.
  • The crank is internally balanced, so it needs a neutral damper and a neutral flywheel or flexplate, plus balancing. Balancing is available as a $478 add-on.
  • Not included: the block, rockers (1.6 ratio, 3/8 in. stud), pushrods (length must be measured), timing set, damper, and flywheel or flexplate.
  • The shop checks piston-to-valve clearance, installed spring height, and deck height.

Optional Terminator X EFI

Add the Holley Terminator X Fox-body 5.0 kit and a matching 42 lb/hr high-impedance EV1 injector set as a separate add-on. Racing use only. The Ford TPS and IAC connectors must be wired in (not included). The Terminator X harness uses EV1 injector connectors.

View the Terminator X EFI add-on

Stroker kit$8,190.88 Holley Terminator X EFI Add-On — Fox-Body 5.0 Kit with 42 lb/hr Injectors $2,324.88

Buy now