This is a stock style setup for the Ford 302 Based Small Block, featuring the stock 3.000" stroke. Whether intended for stock replacement or racing, various levels of compression will allow for improved performance with emphasis on top-end power and high RPM.
Ford Based 302 Small Block Mild stroker setup, using a 3.250" stroke to achieve a displacement of 331 cubic inches. Balanced top and bottom end power makes it ideal for many uses. Available in configurations with various levels of compression which can support naturally aspirated or boosted (supercharged, turbocharged) applications.
Ford Based 302 Small Block, using a 3.400" stroke to achieve a displacement of 347 cubic inches. A 347 has a little bit more bottom end than a 331 while adding additional horsepower from its larger displacement. Available in configurations with various levels of compression which can support naturally aspirated or boosted (supercharged, turbocharged) applications.
This configuration is identical to a 331 (3.250" stroke), except it requires the use of an aftermarket "Big Bore" block. Bore sizes range between 4.125" and 4.165".
This configuration is identical to a 347 (3.400" stroke), except it requires the use of an aftermarket "Big Bore" block. It combines the best of both worlds Bottom-End and High RPM. Flat Top and Reverse Dome setups available which can support naturally aspirated or boosted (supercharged, turbocharged) uses.
